13 Nissan Altima Thousand Withdrawn

Mississippi - Nissan pelakukan withdrawal for repairs (recall) massively to 13,919 units of the Altima sedan being manufactured. Reportedly there are some bolts were not tightened and can not allow to escape.

If this is allowed to stand it will be very dangerous and can threaten the safety of consumers. Program recall involves units manufactured at Nissan's plant in Canton, Mississippi, United States. Recorded production model terdapak 10 May to 26 July 2012. With so 2012 models are also affected.

"Some vehicles may have been manufactured with a transverse four bolts and two bolts on the power steering is not the exact specification," Nissan said in a statement from the NHTSA. Similarly, as quoted from autoevolution, Wednesday (24/01/2012).

 "Based on the investigation, it has been established that if the bolt is loose or detached completely then the driver will have difficulty in controlling the vehicle," said Nissan.

This withdrawal program will start at the end of this month. Nissan authorized repair shop will inspect and tighten the screw that will be problematic to exact specifications.

In the U.S., the 2013 Altima is available in three choices and two engine options, the 2.5-liter DOHC, four-cylinder engine that can generate power 182 (38 mpg) and 3.5-liter V6 engine that can give off power 270 horsepower mated to a CVT.

Prone Burned, Nissan X-Trail Taxable Recall

SYDNEY - Nissan decided to do a recall (recall) for variants of SUV, Nissan X-Trail, in Australia. Recall this is done after the X-Trail has the potential to fire.

As announced Australian Competition and Consumer Commission (ACCC), a total of 8136 units of Nissan X-Trail withdrawn from circulation. Thousands of X-Trail will be examined to find the cause of the problem.

ACCC said that the front bulkhead insulator is too low, because it is exposed to high heat temperatures of the turbocharger. It is considered dangerous and pose a risk of engine fire.

"Isolator to lower front, due to fire due to the high temperatures of the turbocharger. This could potentially cause a fire hazard," said ACCC in summary as reported Inautonews, Tuesday (10/30/2012).

From 8136 Nissan X-Trail is affected by this recall were manufactured between December 21, 2007 to 27 April 2012. Nissan Australia says that there are no reports of incidents or injuries due to the issue of passengers.

Withdrawals will be made by the authorized dealers of Nissan in Australia. Each unit will be checked at the bulkhead insulation, to ensure the position of the insulator that is not too low.

Extrem Concept Nissan Named Baby Beast

SAO PAULO - Nissan had a surprise in the event the Sao Paolo Auto Show 2012, Brazil, by presenting the concept of Extrem. This is the first concept car in Brazil.

Variants of Nissan's concept has a 2 +2 configuration (two doors, two seats front and rear). Nissan called the Baby Beast with a compact new urban sport genre.

The concept looks like a two-door crossover, and using elements of Nissan's GT-R and Nissan Murano CrossCabriolet. Nissan call it a new genre of compact sport utility vehicles.

"We named him Baby Beast. This is urban vehicle rally, a tough fighter jalananm also has the ability to drive in the woods," said Robert Bauer, Nissan's senior design manager as reported Insideline.

But unfortunately Nissan hastily asserted that Extrem will only existed as a concept car, and there are no plans to memproduksinua. Nissan Baby Beast was designed by Nissan Design America in San Diego in collaboration with Brazilian designers.

Extrem similar to the Nissan March, but higher, wider and longer than city car. This concept uses Solar Cortex new exterior colors, with metallic orange color.

 Nissan said the engine power combined with the Baby Beast uses gasoline direct injection system, a turbocharged 1.6-liter capacity. This concept is also used in race cars Nissan DeltaWing Le Mans. The drive system uses front-wheel drive models, and all-wheel drive.

 Design with sharp scalloped sides create the impression of such formidable armored. Hardback glass, roof rails and a separate floating pillar C. Roof pattern inspired by graphic Brazil. 19-inch alloy wheels complement the foot Baby Beast.

Newer Hatchback 2014 Nissan Present

SUNDERLAND - Nissan is finalizing the concept and plans to produce compact hatchback variant (quick) update. Nissan's car will be launched in 2014.

 Nissan will put the new compact is to deal directly with competitors such as the Volkswagen Golf, Ford Focus or Opel Astra. And this car will be produced at its assembly plant in Sunderland, England.

As has been reported previously, prepared variant named Nissan's Invitation. Nissan have high expectations in this segment, to be able to compete in the hatchback class compact.

 Nissan Invitation present this as a model for the type of compact hatchback in the segment B. Invitation to join the other variants such as city car Nissan Micra and the Nissan Juke crossover innovative.

Technology carried Nissan for this Invitation variants with advantages such as safety features, good fuel efficiency and low emissions. Nissan claims Invitation as a dynamic variant, and brought the lifestyle and innovation of a vehicle

The machine used is likely to use the same spec Nissan Note. This means that petrol engines with a capacity of 1.4 and 1.6-liter and 1.5-liter diesel meisn. Features offered is a system Around View Monitor (AVM) to help when parking. And features of the Nissan Safety Shield Technologies, to read the activity around the vehicle.

Machines, Foot & Technology Signal Kustom Yaris

INDONESIA- The legs worked on a line by line with a focus on the specifics of the peak in the product lineup are used in order to get the best functionality, safety factors to the level of harmonization with the overall decorative concept promoted.

Wheels using special order SSR type C with 9.5 inch width on all four parts selected by considering the light weight and the selection of the model is very sporty.

 Currently, no other manufacturer in the world to use SSF (Semi Solid Forging) or HTM (Heat Treatment Manufacturing). Apart from the SSR has patented worldwide, it became the mebuat SSR wheels are light and strong. SSR also have the manufacturing process excellence barrels barrels barrels shingga make it a very light and strong, even though volk te37.

Tires Yokohama ADVAN NEOVA AD08 uses four-wheel Advan NEOVA AD08 tires that have an extreme advantage performace summer tires, in accordance with the concept and the spirit that carried the tire is the most appropriate choice for this modification Yaris.

Coil over suspension parts using Aragosta that has proven its superiority in many racing competitions, combined with underbrace Carbing, Cusco strut bar, cusco sway bar and stability, and resilience of the suspension of this car is not estimate

Carbonetic Carbon LSD 1.5 Way This Yaris suspension immersed in its goal of producing the same round traction on the left and right of the car. Also on LSD application will be very useful because torque is already very big in the machine so that it will make the car to be stable and safe to use day to day.

Brake parts using the best in class by using AP Racing 6-pot at the front of the APP braided line, and AP Racing 4 pot in the rear. Coupled with a customize section with the addition of a rear brake calipers specially made for the hand brake so that the whole performance braking works very qualified, given that engine modifications are on spec.

Application modifications other foot is in the process of electrocoating titanium undercarriage and airbrushing on the undercarriage with the aim of providing maximum decorative impression.

As for the kitchen sector runway, just like the other part, modified the engine to its full potential, even if the regulation registering only 15 percent but Signal Kustom Built strive to provide the totality. Noted engine modifications made by Premier Autowerks, and maximized performance by Indra Maiza and Ovi Sardjan recorded estimated 250HP on wheel dyno.

Modifications made to cover all the changes of the internal parts (Piston, Rod, Head studs, Jun Camshaft, Ported and Polish, Spring valve, Clucth, etc) and other parts such as turbo kits, wastegate, fuel pump, headers, fuel pump and various modifications Other aims to make the machine work to the Yaris is the maximum capacity.

Besides some custom made as stainless turbo manifolds, manifold custom downpipe, custom aluminum turbo piping. In addition to applications that aim to increase the performance of materials used throughout the machine and welding techniques using the best workforce. In the turbo piping sector and in the exhaust system that uses tig welding stainless aims to get engine dress up an interesting and decorative weapon application r titanium, titanium weapon r oil catch tank and weapon r boost port aims to maximize it.

Application engines are very safe to be applied daily due to the addition of LSD, Jun Flywheel and replacement multiple internal security for the machine itself. Machines are built are expected to pursue Horse Power levels are great and can be used for daily use.

Go to the multimedia sector, Gadgets, and Audio that rely on technology and the spirit of youth, that is carried by Pioneer in modifying the Toyota Yaris. Head units are very sophisticated as MIXTRAX can meremix song endlessly like having a private DJ in the car cabin. Additionally Head His unit can be converted into a virtual dashboard with APP Command connected via Wifi OBD allowing car head unit can display the entire car data, and have a google map that can be operated through the car head unit, and can mengorganize reminder and message are full access via the head unit car.

All products used on the project using a Pioneer Yaris is the best in its class, a total of 4 Subwoofer 10-inch, 4-pair speaker middle, 4-power, and a multimedia head unit for primary, as well as a head unit for embedded multimedia baby.

Concept sporty carbon fiber applications applied in the audio box cover some of the details, other finishing materials using a fiber box in order to get aspects of fashion and fun as it can be applied airbrush materials, in addition to the functionality aspect is also considered a safe distance without blocking view mirror and aspects of functioning both on the front (driver and passenger), baby seats in the middle, and multimedia entertainment in the rear.

Multimedia and Gadget applied in a wide range of new technologies and nature has never been applied before. Call it the Iphone Siri for engine start, is working to change the system by manipulating siri trigger the system so that it can enter the program of the new coding, and make it a trigger for engine start.

Touch screen monitor glass (passanger side), is the application of various technologies applied sehinggan combined into a form of touch screen technology on the car glass, car glass can be transformed into a sophisticated multimedia can play a song, type the word application, play youtube , send email, watch videos, and access to some commands directly to the car itself.

Honda Civic Take Part in WTCC

Suzuka - Celebrating 40 years of career as well as 50-year Honda Civic Suzuka Circuit, Japan, the Honda Civic is prime to take part in racing WTCC (World Touring Car Championship) at the Suzuka Circuit.

Honda was actually never participated in the 2008 WTCC season, a Honda Accord Euro. This time, Honda's return to WTCC with Euro Honda Civic (hatchback) are armed with Honda's i-VTEC engine 1.6-liter four-cylinder direct-injection turbo-charged.

Honda Racing in collaboration with JAS Motorsport for this race car development project. Team Honda Racing entrusted to the driver wheel racing nationals Portugal, Tiago Monteiro.

Honda also said it will follow the whole series of races in full WTCC championship next season. Honda has been testing the performance of the Honda Civic Euro's during the summer of 2012 in several world-class circuit, such as, Vallelunga, Slovakia Ringm and Portimao.

In a race that was held last weekend, Tiago Monteiro finished in ninth in the first race. While the second race Monteiro finished in the top 10. In total, Team Honda Racing has managed to collect three points.

Team Honda Racing will go down in the next WTCC championship series at the Shanghai International Circuit, China on 3 and 4 November.

British goto the Honda CR-Z Mugen

LONDON - After inaugurating sport hybrid New Honda CR-Z, the UK also will the coming of New CR-Z Mugen version. Just do not mention how many units of the British public gets a small CR-Z Mugen is.

 New Honda CR-Z Mugen own newly produced as many as 300 units in Japan. Cars work together between Honda and Mugen is indeed limited edition status, and only sold in Japan.

Now in addition to Japan, Honda has also decided to sell in the United Kingdom. Only when the information will be officially launched and how many units of the CR-Z Mugen is provided, can not be ascertained.

Honda CR-Z Mugen does look nicer than the regular version of the CR-Z. With a little more flat change, use the front bumper seem aggressive, side skirts, rear bumper and spoiler and alloy wheels, which makes this car special.

1.5-liter hybrid engine also produces a different energy. Car power up from only 112 HP to 154 horsepower, with a supercharger installation. Car Torque is also increased to 185 Nm. While the electric motor adds 20 HP power and torque of 78 Nm of torque. The combination of both these machines generate output numbers 174 HP with a torque of 263 Nm.

With a capital machine, the Honda CR-Z Mugen can accelerate from 0 to 100 km / h in under eight seconds.

Porsche 911 Carrera S 'Gloss' Gemballa

WOLFSBURG - German aftermarket specialist, Gemballa, again kicked the automotive world to spawn a special package for the Porsche 911 Carrera S Cabriolet generation. The package is believed to enhance the look of the German sports car.

 Reported Inautonews, Gemballa has prepared a package of aerodynamic form of the front bumper has been redesigned with three air intakes larger air. Revised spoiler lip to be more stable at high speeds.

In addition, Shepherd also prepared side skirts, rear bumper, rear diffuser has been modified. Not stopping there sdampai, exhaust systems are now using a special exhaust terinsiprasi of Shepherd Avalanche alert '80s.

To get the special package of Gemballa, the pocket should dirogoh was quite in the 19,860 Euro or equivalent Rp189 million. This price includes the cost of the painting and the installation of the body kit.

For your information, the Porsche 911 Carrera S Cabriolet enhanced 3.8-liter engine capable of producing 400 hp at 7400 rpm rotation with a peak torque of 5600 rpm. This supercar accelerates from a standstill to 100 kph in just 4.7 seconds with a maximum speed of 301 kph.

Toyota Camry Cars transformed into NASCAR

LAS VEGAS - Who says luxury cars such as the Toyota Camry inappropriate content made ​​into a race car. Toyota change the Camry a more frightening like a race car.

Toyota joined NASCAR driver Kyle Busch to design the Camry into a racing car. Camry will be displayed at the event SEMA Show 2012, in Las Vegas, USA.

Camry was designed by TRD (Toyota Racing Development), taken from the base Camry SE 2012. TRD designed it with a named Rowdy Edition. Cars built in Detroit Speed ​​& Engineering, Mooresville, North Carolina.

Identical luxury sedan car dengam officials get features like widebody kit, a new front bumper, the air holes on the hood, dual exhaust and 18-inch alloy wheels with tires BF Goodrich G-Force Sport Comp 2.

"Our approach in designing this car is based on a race car used on the road remain courteous. Camry We still maintaining functionality," Busch said as reported by autoevolution.

Toyota Camry racing will be featured at SEMA 2012, as part of the Racing Dream Build Challenge.

Toyota Camry SE Sport Limited edition uses a four-cylinder 2.5-liter that can produce 178 horsepower (133 kW / 180 PS), with peak torque of 170 lb-ft (230 Nm).

Toyota 86 Special to SEMA 2012

LAS VEGAS - Scion FR-S or Toyota 86 welcome to look different in a grand event held at SEMA 2012 Las Vegas, USA. The car nicknamed Hachiroku looks increasingly sporty with a touch more aggressive.

At least three units of the Scion FR-S has been modified so extreme. All three took part in the event "FR-S Tuner Challenge Competition".

Design is the most violent Scion FR-S berkelir black matte finish. Using a body kit with clear lines make the characters sport is increasingly felt in the car. Moreover, when zip wind pierced the stern sector.

As is known, Hachiroku amplified 2.0-liter Boxer engine Naturally aspirated four-cylinder Subaru belongs. This machine combined with D-4S direct injection Toyota alerts. Power output to 200 hp with peak torque of 151 lb.ft.

In the U.S., the sports car was released at a price of Rp240 million USD24.930 or equivalent. In Indonesia, Toyota 86 removed at Rp600 million.

Mazda Indonesia Not Know About the Cheap Car

Last week, Mazda said it was cheaper to design eco-friendly concept cars (LCGC). The plan will be created with the name of the Mazda2 small version Mazda1.

 Responding to the news of Mazda Motor Indonesia (MMI) claimed not to get a cheap car from Mazda principal. Even the MMI itself does not have a plan in two or three years to launch a cheap car. "We've heard about a cheap car,

and very nice if Mazda does have a central plan. But, it seems there are no plans launch in Indonesia, "said President Director of PT MMI, Keizo Okue, Wednesday (24/10/2012).

 Okue added, if the opportunity is not closed Mazda Indonesia launched a cheap car. According to him, all the possibilities are still there but of course it still depends on the principal.

 "Cheap car was coined a good prospect and he may get there. But, it all depends on principal Mazda. We here can not say anything because there is no info and instructions, "continued Okue.

Mazda1 development project is still in the planning stages. Mazda still see market opportunities and design that will be displayed, before designing the concept Mazda1.

Mazda has two scenarios for designing Mazda1. First to develop a model of super-frugal city car like the Volkswagen Up. Then develop a small car with low prices for emerging markets.

 The second option, Mazda entered the emerging markets in Southeast Asia with an inexpensive model. Mazda can follow the steps to develop Nissan Datsun in Indonesia and Southeast Asia. (zwr)